ISO
9001 Training |
| Course No. |
Course Title |
Duration (Day) |
|
QM 1 |
ISO 9001:2008
Awareness Workshop |
1/2 |
|
QM 2 |
ISO 9001:2008 Sistem
Pengurusan KUaliti |
1/2 |
|
QM 3 |
Understanding ISO
9001:2008 Quality Management System |
1 |
|
QM 4 |
QMS Awareness for
Management |
1/2 |
|
QM 5 |
ISO 9001:2008
Awareness Training for Staff |
1/2 |
|
QM 6 |
Kursus Pengenalan ISO
9001:2008 |
1/2 |
|
QM 7 |
Latihan Kefahaman ISO
9001:2008 |
1 |
|
QM 8 |
Understanding &
Documenting ISO 9001:2008 Quality Management System |
2 |
|
QM 9 |
Understanding,
Documenting & Implementing ISO 9001:2008 Quality
Management System |
3 |
|
QM10 |
Internal QMS Auditing |
2 |
|
QM 11 |
Audit Kuality Dalaman |
2 |
|
QM 12 |
Effective Document
Control System |
1 |
|
QM 13 |
Quality Management
Representative Skills Development |
2 |
|
QM LA |
ISO 9001:2008 Series
Auditor/ Lead Auditor |
5 |
|
ISO 14001 Training |
| Course No. |
Course Title |
Duration (Day) |
|
EM 1 |
ISO 14001:2004
Environmental Management System Awareness |
1 |
|
EM 2 |
Introduction To The
ISO 14001:2004 Environmental Management System
Standard |
1 |
|
EM 3 |
Understanding &
Documenting ISO 14001:2004 Environmental Management
System |
2 |
|
EM 4 |
Environmental htmect
& Impact Assessment |
1 |
|
EM 5 |
Internal
Environmental Management System Auditing |
2 |
|
EM 6 |
Effective Hazardous
Material Handling & Control |
1 |
|
EM 7 |
Chemical & Waste
Management |
1 |
|
EM 8 |
Malaysia
Environmental Law |
1 |
|
EM 9 |
Effective EMR
Development Skills |
1 |
|
EM 10 |
Understand And
Compliance With RoHS And WEEE |
1 |
|
EM LA |
IEMA Registered
Advanced EMS Auditor Course |
5 |
|
OHSAS 18000 Occupational Health & Safety
Management System |
| Course No. |
Course Title |
Duration (Day) |
|
HS 1 |
Occupational Health &
Safety Awareness |
1/2 |
|
HS 2
(DOSH-CEP) |
Understanding &
Documenting OHSAS 18001 Occupational Health & Safety
Management System |
2 |
|
HS 3 |
Effective Initial
Occupational Health & Safety (OH & S) Review |
4 |
|
HS 4
(DOSH-CEP) |
OHSAS 18001 Hazard
Identification, Risk Assessment and Determine Control
(HIRADC) |
2 |
|
HS 5
(DOSH-CEP) |
Internal Occupational
Health & Safety (OH&S) Management System Auditing |
2 |
|
HS 6 |
Introduction To OHSAS
18001 Occupational Health & Safety Management System |
1 |
|
HS 7 |
Malaysia Occupational
Health & Safety (OH&S) Law |
1 |
|
HS 8 |
Effective Lockout &
Tagout (LOTO) System |
1 |
|
HS 9 |
Safety Leadership For
Supervisor |
1 |
|
HS 10 |
Material Safety Data
Sheet Awareness |
1 |
|
HS 11 |
Workplace Inspection
For Safety And Health Auditors |
1 |
|
HS 12
(DOSH-CEP) |
Safety & Health Committee |
2 |
| HS 13 |
Integrated
Management System Awareness (Quality, Environmental,
Occupational Health & Safety) |
1 |
| HS 14 |
Understanding &
Implementing Integrated Management System (Quality,
Environmental, Occupational Health & Safety) |
2 |
| HS 15 |
Internal Integrated
Management System (Quality, Environmental,
Occupational Health & Safety) |
2 |
| HS 16 |
Safe Working In
Confined Space |
2 |
| HS 17 |
Basic Fire Fighting |
1 |
| HS 18 |
Personal Protective
Equipment (PPE) Program |
1 |
| HS 19 |
CIDB Green Card |
1 |
| HS LA |
OH&S MS Lead Auditor
Course |
5 |
|
Lean Manufacturing System
Training |
| Course No. |
Course Title |
Duration (Day) |
| LM 1 |
Lean Principles and
Tools Overview |
2 |
| LM 2 |
Lean Management |
1 |
| LM 3 |
Value Stream Mapping |
1 |
| LM 4 |
Poka Yoke (Mistake
Proofing) |
1 |
| LM 5 |
Practical 6S and
Visual Workplace Technique |
1 |
| LM 6 |
Single Minute Exchange of Dies (SMED)
Techniques |
1 |
| LM 7 |
The Toyota Way: How
to SPEED UP Business Processes, IMPROVE QUALITY and
CUT COSTS |
1 |
| LM 8 |
Total Productive Maintenance (TPM) Training |
1 |
| LM 9 |
Kaizen: The Strategy
for Continuous Improvement |
1 |
|
LM 10 |
Waste Elimination |
1 |
| LM 11 |
Key Performance
Indicator (KPI) Training |
2 |
| LM 12 |
Autonomous
Maintenance - The Key to a Good TPM Implementation
Training |
1 |
|
Six Sigma Training |
| Course No. |
Course Title |
Duration (Day) |
| SS 1 |
Six Sigma
Methodology Overview |
1 |
| SS 2 |
Six Sigma Champion |
2 |
| SS 3 |
Six Sigma Green Belt |
8 |
| SS 4 |
Six Sigma Black Belt |
16 |
|
Lean
Management Training |
| Course No. |
Course Title |
Duration (Day) |
| LS 1 |
Lean Sigma Principles and Tools Overview
|
2 |
|
ISO/IEC 17025 Training |
| Course No. |
Course Title |
Duration (Day) |
| LA 1 |
Understanding Of
ISO/IEC 17025:2005 |
2 |
| LA 2 |
Internal ISO/IEC
17025 Auditor |
2 |
| LA 3 |
Introduction To
Measurement Uncertainty |
2 |
| LA 4 |
Measurement &
Calibration System |
2 |
|
ISO/TS 16949 Training |
| Course No. |
Course Title |
Duration (Day) |
| TS 0 |
Understanding & Transition To ISO/TS 16949:2009
|
2 |
| TS 1 |
ISO/TS 16949:2009 - A Strategy for Implementation
|
2 |
| TS 2 |
ISO/TS 16949:2009 Process Approach Internal Auditing |
2 |
| TS 3 |
Measurement System Analysis (MSA) |
2 |
| TS 4 |
Process Improvement by using Poka Yoke Methodology |
1 |
| TS 5 |
Statistical Process Control (SPC) |
2 |
| TS 6 |
Failure Mode & Effect Analysis (FMEA) |
1 |
| TS 7 |
Advanced Product Quality Planning (APQP) & Production Part Approval Process (PPAP) |
1 |
|
Process / Operational Improvement
Training |
| Course No. |
Course Title |
Duration (Day) |
| PI 2 |
Calibration System |
2 |
| PI 3 |
Problem Solving Through 7QC Tools |
2 |
| PI 4 |
Latihan Penyelesaian Masalah Melalui “ 7QC Tools” |
2 |
| PI 5 |
Business Process Improvement Through 7 Management Tools |
2 |
| PI 6 |
Cost of Quality (COQ) : From Concept to Action |
1 |
| PI 7 |
5S Principles and Implementation |
1 |
| PI 8 |
8-Disciplines Team-Oriented Problem Solving Methodology |
2 |
| PI 9 |
Total Quality Management (TQM) |
2 |
| PI 10 |
Effective Productivity Measurement and Improvement |
1 |
| PI 11 |
Root Cause Analysis |
2 |
|
ISO 13485 Training |
| Course No. |
Course Title |
Duration (Day) |
| MD 1 |
Understanding The ISO 13485:2003 Requirements |
2 |
| MD 2 |
ISO 13485:2003 Internal Auditing Training
|
2 |
| MD 3 |
Effective Risk Management implementation |
1 |
|
AS 9100 Training |
| Course No. |
Course Title |
Duration (Day) |
| AM 1 |
Understanding of AS 9100:2004 |
2 |
| AM 2 |
AS 9100 Internal Auditing |
2 |
| AM 3 |
Understand and implementation of Configuration Management |
2 |
| AM 4 |
First Article Inspection |
1 |
|
Customized Technical Troubleshooting Training (CTTT) |
| Course No. |
Course Title |
Duration
(Day) |
EE1 |
Applied Basic Electronics for Troubleshooting
|
1 - 3 |
| EE3 |
Applied Electronics Application & Simulation for Troubleshooting-Workbench Practical |
1 - 3 |
| EE5 |
Applied Electronics Application & Simulation for Troubleshooting-Computer Simulations Practical |
1 - 3 |
PLC1
|
Applied PLC Theoretical & Practical for Troubleshooting |
1 - 3 |
PLC3
|
Applied PLC Ladder Circuitry Practical for Troubleshooting |
1 - 3 |
EP1
|
Applied Electrical Power for Troubleshooting |
1 - 3 |
EC1
|
Applied Electrical Control for Machine Troubleshooting |
1 - 3 |
H1
|
Applied Hydraulics Basic Principles- Power, Fluids, Conductors, Seals, Reservoirs, Contaminations for Troubleshooting |
1 - 3 |
H3
|
Applied Hydraulics Pumps, Valves, Cylinders, Motors for Troubleshooting |
1 - 3 |
H5
|
Applied Hydraulics Proportional & Servo Valves and Card Systems for Troubleshooting |
1 - 3 |
H6
|
Applied Basic Digital Electro-Hydraulic Devices for Troubleshooting |
1 - 2 |
H8
|
Applied Hydraulic Cartridge Valves for Troubleshooting |
1 - 2 |
H9
|
Applied Hydraulic Transmissions & Circuits for Troubleshooting |
1 - 2 |
H10
|
Applied Hydraulic Pumps & Motors for Troubleshooting |
1 - 3 |
P1
|
Applied Pneumatics Compressor & Air Service Equipment for Troubleshooting |
1 - 3 |
P3
|
Applied Pneumatics Circuit Design & System for Troubleshooting |
1 - 3 |
AQ1
|
Applied Quality for the individuals and managing improvement |
1 - 5 |
BA1
|
Applied Battery Construction, Service, Charging System for Automotive |
1 - 3 |
RBS1
|
Applied Roller Bearing Fundamentals and Services for On-Job-Training |
1 - 3 |
NSMP1
|
Applied Negotiation - Sales & Marketing and Purchasing |
2 |
OJT1
|
Applied On-Job-Training for:-
 Electro-Pneumatics
Electro-Hydraulics
Electro-Power
Electro-Control
Electronics
PLC-Programmable Logic Controller
Machines Mechanical & Electrical Troubleshooting |
5 |
CT1
|
Applied Cycle Time Reduction |
2 |
| HMI |
Applied Human Machine Interface-HMI |
2 |
First Aid and Emergency Response Training |
| Course No. |
Course Title |
Duration (Day) |
| FA 1 |
Basic Life Support |
1-2 |
| FA 2 (DOSH-CEP) |
Occupational Fist Aid & CPR |
2 |
| FA 3 |
Advance First Aid Course |
4 |
| FA 4 |
Talk on CPR/First Aid Demonstration |
1/2 |
| FA 5 |
Emergency Response and Emergency
Preparedness |
2 |
| FA 6 |
Healthy Life Style Talk |
1/2 |
| FA 7 |
Company Medical and Health Profile for
Employees |
TBA |
| FA 8 |
Basic Water Safety & Rescue |
1 |
Driving Training |
| Course No. |
Course Title |
Duration (Day) |
| DT-1 |
Forklift Safety Training
|
1-3 |
| DT-2 |
Safe & Defensive Driving Training |
1-2 |
|
Management Soft Skills Training |
| Course No. |
Course Title |
Duration (Day) |
| MS 1 |
Customer Care Excellence |
2 |
| MS 2 |
Effective Presentation Skill |
2 |
| MS 3 |
Effective Interpersonal Skill |
2 |
| MS 4 |
Employment Act |
2 |
| MS 5 |
Effective Time Management |
1 |
| MS 6 |
Time and Stress Management |
1 - 3 |
| MS 7 |
Organising and Managing Office Records & Files
Effectively |
2 |
| MS 8 |
Preparation For Attending An Interview |
1 - 2 |
| MS 9 |
Excellent Customer Service for Front Line Staff |
2 |
| MS 10 |
The Professional Receptionist |
2 |
| MS 11 |
Professional Development for Secretaries &
Administration Personnel |
2 |
| MS 12 |
Teambuilding and Interpersonal Relationships |
TBA |
| MS 13 |
Managing Promotion Interview For Interviewer |
1 - 2 |
| MS 14 |
Be A
Powerful Negotiator |
2 |
| MS 15 |
Excellence In Business Communication |
2 |
| MS 16 |
Effective English Communication |
1 - 2 |
| MS 17 |
Business Etiquettes |
1 - 2 |
| MS 18 |
Employability Skills |
1 - 2 |
| MS 19 |
Personal Grooming |
1 - 2 |
| MS 20 |
Customer Service For Hospitality |
1 - 2 |
| MS 21 |
Handling Customer Complaints |
1 - 2 |
| MS 22 |
Telephone Customer Service |
1 - 2 |
| MS 23 |
Effective Interpersonal Skill |
1 - 2 |
I.T. Training |
| Course No. |
Course Title |
Duration (Day) |
| IT-1 |
Microsoft Windows 95/98/NT/XP/2000-Basic Features for Windows operating Systems
|
1 |
| IT-2 |
Microsoft Office Word 2003 (Basic)
|
1 |
| IT-3 |
Microsoft Office Word 2003 (Intermediate)
|
1 |
| IT-4 |
Microsoft Office Word 2003 (Advanced)
|
1 |
| IT-5 |
Microsoft Office Excel 2003 (Basic)
|
1 |
| IT-6 |
Microsoft Office Excel 2003 (Intermediate)
|
1 |
| IT-7 |
Microsoft Office Excel 2003 (Advanced)
|
1 |
| IT-8 |
Microsoft Office PowerPoint 2003 (Basic)
|
1 |
| IT-9 |
Microsoft Office PowerPoint 2003 (Intermediate)
|
1 |
| IT-10 |
Microsoft Office PowerPoint 2003 (Advanced)
|
1 |
